Minimum Specifications
Base Fabric Type
Standard: Polyester
Metric: Polyester
Base Fabric Weight (nominal)
Standard: 5.0 oz/yd2
Metric: 170 g/m2
Finished Coated Weight
ASTM D751
Standard: 21.0 oz/yd2 (+2/-1 oz/yd2)
Metric: 712 g/m2 (+70/-35 g/m2)
NOTE: Average weight of opaque fabrics will be ~ 4 oz/yd2 (140 g/m2) heavier
Trapezoid Tear
ASTM D4533
Standard: 50/60 lb
Metric: 23/267 N
Grab Tensile
ASTM D751
Standard: 375/350 lb
Metric: 1669/1558 N
Strip Tensile
ASTM D751 Procedure B
Standard: 350/325 lb/in
Metric: 307/285 daN/5 cm
Adhesion
ASTM D751 Dielectric Weld
Standard: 10 lb/in
Metric: 9 daN/5 cm
Hydrostatic Resistance
ASTM D751 Procedure A
Standard: 500 psi
Metric: 3.45 MPa
Dead Load Seam Strength
ASTM D751
2 in (50 mm) seam, 4 hr, 1 in (25 mm) strip
Standard: 106 lb @ 70° F, 53 lb @ 160° F
Metric: 472 N @ 21° C, 233 N @ 71° C
Low Temperature - LTC
ASTM D2136
1/8” mandrel, 4 hr
Standard: Pass @ -40° F
Metric: Pass @ -40° C
Flame Resistance
Meets NFPA 701; ASTM 6413 - 2 second flameout;
Registered by California Fire Marshal (No. F-10302);
ASTM E84 - flame spread index ≤25, smoke development rating ≤450